Freedom Fix-It Dots™ – 1" Hypoallergenic CGM, Insulin Pump & Medical Adhesive Fix Patches

Tiny Dots. Big Fix.™

Meet Freedom Fix-It Dots™ — small but mighty 1-inch adhesive utility patches made to anchor, repair and reinforce the everyday trouble spots that come with wearing CGMs, insulin pumps, infusion sets and other adhesive-worn medical devices.

Made from the same hypoallergenic adhesive patch material used in our other Freedom Band patches, Fix-It Dots let you reinforce only the spot that needs attention instead of applying another full-size overpatch.

Each 1" Fix-It Dot features a center-cut split release liner, allowing you to position and apply the patch while minimizing contact with the adhesive.

ANCHOR • REPAIR • REINFORCE

Use Freedom Fix-It Dots™ to help:

• Anchor insulin pump tubing to the skin, creating a secondary point of support away from the infusion site
• Help reduce direct pulling and tugging on pump tubing near the cannula
• Create a tubing strain-relief point by securing tubing farther away from the infusion site
• Keep loose pump tubing positioned against the skin
• Rescue lifting CGM adhesive edges
• Reinforce curling or peeling CGM overpatches
• Secure a small lifting section of an insulin pump or infusion-set adhesive
• Reinforce the edge of an existing medical adhesive patch
• Add targeted adhesive support before sports, exercise, swimming, sleeping or everyday activities
• Keep a few in your diabetes bag, purse, backpack or travel kit for an on-the-go adhesive fix

UNIVERSAL DEVICE COMPATIBILITY

Freedom Fix-It Dots™ are not device-specific. They are designed as universal adhesive utility patches for use on the skin with CGMs, insulin pumps, infusion sets and similar externally worn medical-device adhesive systems.

Great for use alongside adhesive systems for devices including:

Dexcom

• Dexcom G7
• Dexcom G7 15 Day
• Dexcom Stelo
• Dexcom G6 and other adhesive-worn Dexcom sensors

FreeStyle Libre

• FreeStyle Libre 2
• FreeStyle Libre 2 Plus
• FreeStyle Libre 3
• FreeStyle Libre 3 Plus
• Lingo and other adhesive-worn Libre sensors

Omnipod

• Omnipod 5
• Omnipod DASH
• Other adhesive-worn Omnipod Pods

Medtronic

• Simplera
• Simplera Sync
• Guardian CGM systems
• MiniMed infusion-set adhesives and tubing
• Other adhesive-worn Medtronic diabetes devices

Tandem Diabetes Care

• Tandem Mobi adhesive systems and tubing
• t:slim X2 infusion-set tubing
• Tandem infusion-set adhesives

Beta Bionics

• iLet infusion-set adhesives and tubing

Plus Many More

Freedom Fix-It Dots™ can be used with most CGMs, insulin pumps, infusion sets, patch pumps and other externally worn medical devices that use adhesive tape or patches on the skin, provided placement does not interfere with the device, insertion site, cannula, sensor, ports, vents or manufacturer-required components.

1 INCH. COUNTLESS LITTLE FIXES.

Why replace an entire overpatch because one little edge starts lifting?

At approximately 1 inch round, Freedom Fix-It Dots™ provide targeted reinforcement exactly where it's needed while keeping unnecessary adhesive coverage to a minimum.

Center-Split No-Touch Application

The release liner is cut directly through the center of every Fix-It Dot.

Peel • Position • Stick • Press

The split liner makes these tiny patches easier to handle and helps minimize touching the adhesive with your fingers during application.

Pump Tubing Anchor

For tubed insulin pumps, a Fix-It Dot can be placed farther down the tubing to create an additional skin anchor point.

Leave a small amount of relaxed tubing between the infusion site and Fix-It Dot. Do not pull the tubing tight. This secondary anchor can help reduce the amount of an everyday tug or snag transferred directly toward the infusion site.

Small Enough to Carry Everywhere

Keep Freedom Fix-It Dots™ anywhere you might need a quick adhesive rescue:

Diabetes bag • Gym bag • Purse • Backpack • School bag • Travel kit • Work bag

When a patch starts lifting or tubing needs a little extra control, Fix-It.™

FREEDOM FIX-IT DOTS™

Tiny Dots. Big Fix.™

ANCHOR • REPAIR • REINFORCE

1" Hypoallergenic Adhesive Utility Patches for CGMs, Insulin Pumps, Infusion Sets & Medical Adhesive Devices

Important: Freedom Fix-It Dots™ are external adhesive accessories and are not electronic components of, or replacements for, any CGM, pump or infusion set. Do not place directly over an insertion/cannula site, sensor opening, vent, medical-device opening, irritated/broken skin or other area that the device manufacturer instructs users to keep uncovered. Follow the instructions supplied with your medical device.